
System Keypads
and Remote
Controls
and Remote Controls
21
A large-size wireless remote control mainly desi-
gned as a panic or emergency button for JA-6x
series alarm systems. It can also be used for the
extension of the functionality of a security system
such as automation and the wireless control of
appliances. The RC-22 sends out two different
commands by pressing either the A or B buttons.
Communication band 433 MHz
Voltage 6 V battery (L1016)
Calculated battery lifetime approx. 1 year
Communication range 100 m (open area)
Dimensions 80 x 80 x 15 mm
Complies with EN ETSI 300220, ETS 300683
and EN 50134
The RC-60 is used to convert wired signals to
wireless signals which it sends to JA-6x wire-
less systems. It enables connection to a wired
external controller, such as an access system,
card or chip reader, electrical lock etc. The RC-60
remote control is protected by a tamper sen-
sor. It has two inputs that can be used in two
operating modes. In the first mode, one input is
used for setting and the other for unsetting. In
the second mode the A input reacts to a GND
connection by sending a “set” signal, sending an “unset” signal when the GND is subsequently disconnected.
The B input reacts to a brief or continuous connection to GND by sending a panic alarm (PANIC) signal and if the
system is set, the system is also instructed to unset.
Communication band 433 MHz
Voltage 2x 1.5 V AAA batteries
Calculated battery lifetime approx. 1 year
Communication range max. 100 m (open area)
Loops for external operation 2 unbalanced
Indication LED testing and low battery
Security grade 2 (EN 50131-1)
Certificate from NBU category D
Dimensions 110 x 30 x 27 mm + antenna 40 mm
Environment class II, general interior (-10 to +40 °C)
RC-60 Remote Control
The RC-28 remote control is a single-chan-
nel transmitter that is used with the UC-260
acoustic indicator as a wireless doorbell button.
It can also be used with up to 8 other sounders
where each one has a different melody for easy
identification. The button is compatible with
other UC-2xx relay receivers.
Communication band 433 MHz
Voltage 6 V battery (L1016)
Calculated battery lifetime approx. 1 year
Communication range max. 50 m (open area)
Dimensions 80 x 28 x 15 mm
RC-28 Wireless Door Bell Button
RC-22 Wireless Remote Control
The RC-86 is designed for wirelessly operating
Jablotron systems. It controls setting/unsetting,
triggers panic alarms, and controls other appli-
ances. The big advantage is the possibility of
configuring it partly or completely to 868 MHz
(Jablotron’s Oasis 8x series, etc). Then just by
one key fob it is possible to operate 2 different
systems on 433 and 868 MHz. A two button version of the case is also available. The user can independently con-
trol other devices, e.g. control panels and garage doors or the partial arming mode of the control panel. The key
fob provides a useful button locking function. An easy procedure allows you to block the key fob from reacting
to any buttons being pressed. Pressing two buttons simultaneously causes a PANIC alarm in the control panel.
Communication band 868 MHz/433 MHz
Voltage alkaline battery type L1016 (6 V)
Calculated battery lifetime approx. 2 years
Communication range approx. 30 m (open area)
Dimensions 52 x 18 x 12 mm
Complies with ETSI EN 300220, EN 55022,
EN 50134-2, EN 50130-4, EN 60950-1
RC-86 Key Fob
Kommentare zu diesen Handbüchern